How do i capture good data with micasense sensors? MicaSense Sensors enable you to capture great data. This article offers some basic guidelines to provide the best results. It covers the following topics: Good data starts with good mission planning. The area to be captured should be larger than the actual field of interest so that there is sufficient data all the way to the edges of the field.Where is micasense located? MicaSense headquarters is located at 1300 N Northlake Way #100, Seattle. Where are MicaSense offices? MicaSense has an office in Seattle.How do i connect the micasense sensor to the pixhawk? More detail can be found in the User Guide for MicaSense Sensors (Altum, RedEdge M/MX, Dual Camera System). Once this is set up, connect the pixhawk’s auxiliary out port that you assigned as a camera trigger to the Camera's PWR/TRIG 3-pin connector.What is the micasense dual camera system payload? Double the bands, double the spectral resolution, unlimited analytical capabilities in one payload! Producing aligned 10-band data is much more valuable than simply providing two separate 5-band maps. The MicaSense Dual Camera System Payload synchronizes capture of all 10 bands allowing the creation of multiple indices and new analytics.
If the problem persists, contact MicaSense at [email protected]. Both LEDs solid ON. Indicates a software/hardware problem. If the problem persists, contact MicaSense at [email protected] . CAUTION. Power OFF the sensor before removing the storage device. Failure to do so may corrupt some of the files in the storage device if they are