Quick Asked: Kidde Smoke Detector Tech Support?

Are you searching for Kidde Smoke Detector Tech Support? By using our below available official links ( which are always up to date), you can find contact information without any difficulty. It may list Phone number, Mobile phone, Email Address & Customer service information.
Last update: 01 May, 2024 316 Views

How do you connect smoke detectors? Connect the Smoke Detector to the Base Grab the smoke detector in your hands and align the slots in the back of the smoke detector with the notches on the base. Twist the detector until it locks into place. Check to see that both sides are snug and secure.

What do you need to know about smoke detectors?

  • Ionization smoke alarms contain bits of radioactive material that emit ions that create a faint electrical current between electrodes. ...
  • Photoelectric smoke alarms operate using a light source and a photoelectric sensor. ...
  • Combination smoke alarms use both ionization and photoelectric technologies. ...


How does a smoke detector sense smoke? There are several different types of sensors. A photo beam smoke detector uses a low power laser and a light sensor to detect an interference. The beam of light is shot from the laser to the detector at all times. When smoke crosses blocks path the detector no longer senses the light and sounds the alarm.

What kind of smoke detector do i need? At bare minimum, you need at least one smoke detector and carbon monoxide alarm on every level of your home—basement, main living area, attic, etc. Ideally however, you should place a smoke detector in every bedroom and in hallways outside sleeping areas.

Listing Results Kidde Smoke Detector Tech Support? Question Answers

Kidde CO and Photoelectric Smoke Alarm KNCOPED

The combination smoke and carbon monoxide alarm shall be Kidde Part Number CP9000 (Model KN-COPE-D) or approved equal. It shall be powered by one 9V battery. The temperature operating range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operating range shall be 10% - 95% relative humidity, non condensing.

Did the information help you? If so, please share!
If you think the information on this page has been helpful to you, would you be willing to share it? Your sharing is the driving force for our continuous work.
  1. Home ›
  2. K ›
  3. Kidde Smoke Detector Tech Support?