Quick Asked: I2c Architects Contact Us?
Last update: 05 May, 2024 
298 Views
Why choose i2c for architectural design? At i2C we create innovative architectural design. i2C has over 20 years’ experience in retail, urban planning, mixed use, interiors and build to rent sectors. With studios in Melbourne, Sydney, Brisbane and Perth we pride ourselves on our service and continuous delivery of excellence.What is the i2c bus? The I2C bus is a standard bidirectional interface that uses a controller, known as the master, to communicate with slave devices. A slave may not transmit data unless it has been addressed by the master. Each device on the I2C bus has a specific device address to differentiate between other devices that are on the same I2C bus.What is the physical i2c interface? The physical I2C interface consists of the serial clock (SCL) and serial data (SDA) lines. Both SDA and SCL lines must be connected to V CC through a pull-up resistor.What is the maximum number of i2c devices i can add? I2C Device Addressing All I2C addresses are either 7 bits or 10 bits. The use of 10 bit addresses is rare and is not covered here. All of our modules and the common chips you will use will have 7 bit addresses. This means that you can have up to 128 devices on the I2C bus, since a 7bit number can be from 0 to 127.