How can i speed up my pepwave network? If your signal strength (called "RSRP" in LTE networks) is stronger than about -100 dBm, stronger signal won't speed up your connection any further. Positioning and aiming MIMO antennas well is crucial to getting the best performance to your Pepwave, or indeed any other router.How do i configure the pepwave device connector on my pc? Now you are ready to start the first time configuration of the Pepwave Device Connector. On your PC, start a web browser, go to this URL: http://192.168.20.1/ Choose Your Connection Mode The Device Connector supports both Wi-Fi and wired connection modes.How do i install the pepwave max br1 lte? Installation is easy, the Pepwave Max BR1-LTE accepts 10-30V DC and the Antenna includes 4.5m cable tails. The compact antenna measures only 140mm diameter and 60mm high and can be deck, bracket or pole mounted. Once installed simply insert your 4G simcard and the system will configure the correct settings for you.Is the pepwave max transit duo cat 6 lte advanced router right for you? The Pepwave Max Transit DUO Cat 6 LTE Advanced router is perfect for RVers and travelers looking to use cellular data and campground WiFi to stay connected on the road. You can load up to 4 SIM cards into this router from multiple carriers and use 2 SIM cards at a time creating more additional bandwidth through cellular bonding.
PepWave Max Transit Duo. The PepWave Max Transit, a bonded cellular broadcast solution, is ready to facilitate your streaming broadcasts. With a compact form factor, simultaneous dual-band 11ac Wi-Fi, and up to two embedded cellular modems, the PepWave MAX Transit is ready to deliver fast, reliable Wi-Fi hotspots.
Featuring the Pepwave Max BR1-LTE an Industrial grade router and one compact MIMO antenna combining 2x 4G, 2x Wifi and 1x GPS antennas in one small package. Installation is easy, the Pepwave Max BR1-LTE accepts 10-30V DC and the Antenna includes 4.5m cable tails. The compact antenna measures only 140mm diameter and 60mm high and can be deck
Connect to the SSID: PEPWAVE_XXX where XXXX represents the last four digits of your device’s serial number (e.g. 7D6E). Passphrase is the last 8 hexadecimal digits of your device’s LAN MAC address (e.g. DDC3CCC0) Now you are ready to start the first time configuration of the Pepwave Device Connector.
Single Cellular: Redundant SIM Slots for Auto Failover: MAX BR1. Industrial-Grade M2M 4G LTE Router; Automatic WAN and IPsec Failover; 1x Embedded ...